Ol'e Bookie sold me an old buffalo horn.  I already have a few horns, but not a black buffalo horn. So I just had to make one. Took a ton of scraping to peel thru the layers.  Then drilled down into the cavity from the tip and shaped the end of the horn.   I made the horn plug out of Iowa native walnut scrap left over from my pistol.  After putting it on the horn, I took black locust tree thorns and put them in around the perimeter of the horn to hold it onto the horn and add decoration. Added a leather strap from the shop and whola, me now have powder horn.

(Each photo above will open into a new window. Click the "X" in the upper right corner of this window to close the window.)

Hoot AL Rifle Shop

If you like the site or have any questions, drop me a line by clicking on "Hoot" below.



(c) Copyright 2005.  All Rights Reserved. 

d.